Arduino Mega 2560

Arduino Mega 2560 follows Open-source principles, which means you can freely download the development environment and any associated resources.

Ideal for project work and often used in schools, teaching, motor control, robotics, and similar applications; the Arduino platform allows for rapid application development using either Java (cross-platform) or Processing (a C derivative used to write sketches using Arduino IDE downloadable from Arduino.cc website.) Featured by Project Kits BD.

Input voltage should be limited to 6 ~ 12V, but if the voltage supplied is less than 6V, I / O port may not be supplied to a voltage of 5V, and therefore readings may become unstable. If the voltage is greater than 12V, the regulator device may overheat causing damage to the control board. It is therefore recommended that you supply between 6.5 and 12V, utilizing typical power supplies of 7.5V or 9V. Featured by Project Kits BD.

The Mega 2560 ATmega2560-16AU Board plus USB Cable compatible with Arduino is fully compatible with the Arduino software and has complete hardware compatibility with the Arduino Shield high-performance processor and enough memory to handle even complex solutions.

Features :

1. High Endurance Non-volatile Memory Segments –
2. Write/Erase Cycles: 10,000 Flash
3. Atmel QTouch library support
4. JTAG (IEEE std. 1149.1 compliant) interface.
5. Real-time Counter with Separate Oscillator
6. Programmable Watchdog Timer with Separate On-chip Oscillator
7. On-chip Analog Comparator
8. Interrupt and Wake-up on Pin Charge
9. Power-on Reset and Programmable Brown-out Detection
10. Internal Calibrated Oscillator
11. External and Internal Interrupt Sources
12. Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby