Click For Zoom
Click For Zoom
MPU9250 9-Axis Gyro + Accelerometer + Magnetometer Module
৳ 750 ৳ 550
Product Code: PKB 2878
Dial to order by phone
01683623013
| Inside Dhaka | ৳ 60 |
| Outside Dhaka | ৳ 150 |
| Pickup From Store | ৳ 0 |
| Inside Mirpur and same Day Delivery | ৳ 100 |
01611526238
| China Product | |
| 100% Pay Cash on Delivery Avilable | |
| Delivery within: 2-3 business days |
MPU9250 9-Axis IMU Module: Gyro, Accelerometer and Compass in One Board
The MPU9250 is a compact 9-axis motion tracking module that combines a 3-axis gyroscope, a 3-axis accelerometer and a 3-axis magnetometer (AK8963 compass). It gives 16-bit digital output, so your Arduino, ESP32 or ESP8266 can measure tilt, rotation, heading and movement accurately. It is a popular choice for EEE, CSE and Mechatronics students in Bangladesh building drones, gimbals, self-balancing robots, navigation and gesture control projects.
Key Features
- 9-axis motion sensing (3-axis gyro + 3-axis accelerometer + 3-axis magnetometer)
- 16-bit ADC for each axis, high resolution output
- Selectable gyro range: ±250, ±500, ±1000, ±2000 °/s
- Selectable accelerometer range: ±2g, ±4g, ±8g, ±16g
- Magnetometer range: ±4800 µT, for compass heading
- I2C and SPI interface support
- Works with Arduino Uno, Nano, Mega, ESP32, ESP8266 and Raspberry Pi
- Low power, small size, good for wearable and flight controller builds
- Breadboard and jumper-wire friendly
Specifications
- Chip: MPU-9250 (InvenSense / TDK)
- Axes: 9 (3 gyro + 3 accel + 3 magnetometer)
- Operating Voltage: [3V-5V DC, onboard regulator]
- Interface: I2C / SPI
- I2C Address: 0x68 (0x69 when AD0 is HIGH), magnetometer 0x0C
- Resolution: 16-bit
- Pins: [VCC, GND, SCL, SDA, EDA, ECL, AD0, INT, NCS, FSYNC]
- Header Pins: [pre-soldered / not soldered]
Applications / Project Ideas
- Drone and quadcopter flight controller
- Gimbal and camera stabilizer
- Self-balancing robot
- Compass and navigation systems
- Gesture-controlled robot or car
- VR / motion tracking and wearable devices
Important Usage Note
MPU9250 is a 3.3V logic chip. Most GY-9250 boards have an onboard regulator for 5V power, but for ESP32/ESP8266 use 3.3V logic and for Arduino Uno use a level shifter or keep I2C pull-ups at 3.3V for long-term safety. Its WHO_AM_I ID (0x71) differs from MPU6050, so use an MPU9250 compatible library such as MPU9250_WE or Bolder Flight MPU9250. Calibrate the magnetometer away from motors and magnets for accurate heading.
Package Includes
- 1 x MPU9250 9-Axis Module
